Mobile Centrifugal Humidifier Humidifier Textile Humidifier

ModelLX500L

Humidifying capacity0-40Kg/HAdjustable

Applicable area300㎡(3Migao)

Rated Power530W(220V)

Body size520*350*1500mm

 First, Woguan centrifugal humidifier working principle:

     Woguan centrifugal humidifier uses high-speed motor to drive the composite impeller to rotate to generate vacuum. The water within water storage tank is pressed to the composite atomization impeller through water-absorbing machine under atmospheric pressure. The atomization diameter is5umFine sprays, after the breeze of the lower air duct, it is sent to the fog outlet, and the high-speed air flow of the upper air duct is combined to form a high-speed air mist spraying into the air, the aerosol is in contact with the waste heat in the air and completely vaporized to achieve the purpose of humidification.

Second, the working characteristics of Woguan centrifugal humidifier:

1, the humidification speed is fast;       2, isoenthalpy humidifying;   3, no special requirements for water quality;   4, automatic control can be implemented

Third, the use conditions of Woguan centrifugal humidifier:

1, environment temperature: normal working environment temperature is0-40 o C

2, water source: neutral tap water is generally used, and the pressure of the water inlet when hanging is used0.6-3kg/cm2

4. Use of Woguan centrifugal humidifier:

    Woguan centrifugal humidifier is widely used in papermaking, printing, tobacco, plastic, textile, knitting, flowers, Vegetation cultivation, garden landscaping, storage rooms and public places to improve moisture regain.

V. Performance characteristics of Woguan centrifugal humidifier:

1.The atomizing plate is made of stainless steel to enhance the corrosion and deformation of water and air.

2.Atomization tooth and atomization wind deflector adopt high quality engineering pigment to enhance the function of corrosion and deformation to water and air, and have a long service life.

3.The fan blade is made of stainless steel to strengthen its toughness and oxidation resistance.

4.Water hole ≥5mm, even if the water quality is not good, it will not cause blockage.

5.The foot of the hand-push humidifier has wheels to increase its flexibility. Where is the humidity not enough, it can be used to reduce the use investment.

6.The hanging head is equipped with synchronous asynchronous motor, which can make the humidifier120° one-way swing to increase the humidification area. Open air circulation is used in the design.

7.Even if there is dust in the workshop, it will not cause blockage. The whole surface is sprayed with plastic, so the overall service life is relatively long.